Lowest building height

The concept is based on thin panels made of high density polystyrene covered with aluminium foil. This design makes it possible to lay the flooring material directly on top of the panels. The panels emit heat more quickly and efficiently than traditional embedded systems because the distance between the pipe and floor surface is shorter and have lower thermal mass.

Best of all, the floor level needs not be raised by more than 13 mm!

13mm


skivaTunn

Flooré panel – for the lowest building height

THIS PANEL IS BEST SUITED FOR:

  • Floors that already have sufficient thermal insulation
  • Floors that do not need substantial thermal insulation, e.g. intermediate suspended floors above heated rooms
  • Rooms where the height of the room cannot be reduced

 


skivaIsolerad

Flooré panel – with additional insulation

THIS PANEL IS BEST SUITED FOR:

  • Floors that have none or insufficient thermal insulation
  • Suspended floors where the room or space underneath is unheated
  • Minimizing downward heat losses
  • Slab on ground constructions, e.g. basement floors